Event Year: 2021 Event Location: Virtual Competition: Junior Solar Sprint Division: 3-5 School: Pembroke Pines/FSU Charter Elementary Team Size: 1
Pembroke Pines Charter Elementary School
Name: Simon T
Grade 4th
I wanted to build a solar car because my last EnergyWhiz project was a solar oven and I thought that it would be fun to continue the tradition of using the sun to create new challenges.
Problem
Solution
Goal
My first problem was that the gear was crooked and so it would not travel forward.
I adjusted it so that it was straight and went forward.
Make the car have movement.
The next problem was that the wheels were too small so it was too close to the ground so it would scrape on the ground.
I got bigger wheels and put the axel underneath the chassis instead of on top.
To make it go without having it hit the ground.
The gear was too small so it could not reach the wheel gear.
We got a bigger gear that would reach.
To make sure wheels would actually move,
NO SUN
The following three photos are of my plans for the cars dimensions and model types.
Date: March 29th, 2021
Started design process
Date: April 3rd, 2021
Designed team shirt
Date: April 10-11th, 2021
Gathered supplies to build the car including, balsa wood, motor, paint, and other car basics.
Date: April 12th, 2021
Built car number one and tested it- scrap car one.
Date: April 13th, 2021
Design and build car two
Date April 17th, 2021
Tested car two and it was a success
The next three photos are of my shirt design.
The next photos are of my assembly process with the car.
Timelapse video of the car building process
My first step after planning was to cut my truck out of balsa wood Always wear safety gear.I assembled all the cut-out pieces with hot glue. The inside of my solar car-note the support slats.This photo is of the inside of my car and the motor.
Here are some photos of the finished product
Share This Post:
7 thoughts on “SOL Sprinter”
I love the shirt! What a great idea to also do a shirt to go with your solar car (truck!) project! And I like your little driver 🙂
Wow, there’s no stopping that car! It’s great that you showed its ability to travel on rough sidewalk and roads without stopping. Great design and well thought out fixes for problems you encountered. Great job and good luck!
wow! I love the design! I like how your car looks like truck you would see on the streets and how it looks like its carrying the solar panel with a guy riding on it! PS: that shirt is cool.
I love the shirt! What a great idea to also do a shirt to go with your solar car (truck!) project! And I like your little driver 🙂
I love how you used graphs to organize all the information
Wow, there’s no stopping that car! It’s great that you showed its ability to travel on rough sidewalk and roads without stopping. Great design and well thought out fixes for problems you encountered. Great job and good luck!
Thanks for the great feedback
the design is op
wow! I love the design! I like how your car looks like truck you would see on the streets and how it looks like its carrying the solar panel with a guy riding on it! PS: that shirt is cool.
Had a lot of fun designing and making the shirt